Licensed for Westchester · Since 2007

Roofing Contractor in Rye, NY

Slate, clay tile, cedar, and asphalt roofs for Rye homes, installed by a builder that works within Westchester's licensing rules and the City's design standards.

2007In business since 2007
35People on our team
NY+CTLicensed across the line
FixedWritten price every time

Before Anyone Touches Your Roof in Rye

Roofing in Rye runs on New York rules. Three of them matter to every homeowner.

Westchester County license required

Any home improvement contractor in Westchester must be licensed by the county's Department of Consumer Protection. Look for the green bumper sticker on work vehicles and verify any company in the county's contractor search before you pay a deposit. We are licensed for Westchester work.

Permits depend on scope

The City of Rye's building code exempts adding a new roof covering within the framing's design load. A permit is still required for roofs over decks, terraces, or entry doors, and for installing a chimney or flue. We confirm your specific job with the Building Department before we price it.

Design review for visible changes

Rye's Board of Architectural Review rules on exterior appearance when permitted work substantially changes how a roof or facade looks from the street. Swapping clay tile for shingles, or adding a dormer, can trigger review. We check with the City before we price changes like these.

A Connecticut Builder Working Across the Line

Ferrandino Enterprises began in 2007 when Jason Ferrandino, a Ridgefield native and WCSU business graduate, turned years of fieldwork with his father into his own company. It now employs 35 people from offices in Ridgefield and Wilton and takes on roofing, masonry, additions, storm restoration, and full renovations across Fairfield County and Westchester.

We've worked just over the state line in Greenwich, including storm repair, and Rye is part of our regular service area. A Rye homeowner gets range from a builder: the same team can reframe a dormer, rebuild a chimney crown, or restore plaster ceilings after a leak.

Rye Roofs by Architecture

Rye's houses span more than a century of styles, and each one fails in its own way.

Tudor Revival

Steep pitches, many valleys, tall chimneys, and roofs that meet half-timbered gables. Weak spots are the valleys and every place the roof butts into masonry or stucco. We rebuild valleys with full-width underlayment and replace step and counter flashing at each chimney and wall, with our masons repointing as we go.

Mediterranean and Clay Tile

Clay tile itself can outlast several asphalt roofs. What usually fails is the underlayment, fasteners, or tiles cracked by foot traffic. Often the right answer is lifting the tile, renewing the underlayment and flashing, and relaying sound tiles with matched replacements. Any change of material may need design review.

Sound-Front Colonials

Near Rye Beach, Milton Point, and Oakland Beach, the threat is wind and salt. We fasten starter courses, rakes, and ridges for high wind, and choose flashing metals that hold up to salt air.

Postwar Houses Inland

Most are architectural shingle. The difference between a good and mediocre job is decking, ice barrier at the eaves and valleys, and ventilation, not the shingle label.

Changing the Roof, Not Just Replacing It

Change a pitch on a leaking porch roof, add a dormer, roof over an entry or deck, or tie a new addition's roof into existing slopes. Each needs a permit and possibly design review. We prepare the drawings and handle the filing.

After a Nor'easter

Cover the opening the same day if conditions allow, photograph every damaged area for your insurer before anything is moved, check the attic and ceilings for hidden water, then give you a written price for the permanent repair.

What We Do in Rye

  • Leak investigation from the attic and roof, with photo documentation
  • Slate and clay tile repair and relaying
  • Full replacement in asphalt, cedar, or low-slope membrane
  • Copper and lead-coated flashing at chimneys, walls, and valleys
  • Chimney masonry by our own crew
  • Storm protection, insurance documentation, and permanent repairs
  • Gutter and leader replacement

Insurance certificate note

When a Rye job needs a City permit, the City requires our liability certificate to name the City as additional insured, along with proof of workers' compensation and disability coverage. We provide all of this as standard.

The Standard We Hold Ourselves To

Every Rye project is covered by the Ferrandino Gold Standard Pledge. Its workmanship and materials commitments matter most on slate, tile, and copper work, where shortcuts don't show until years later.

  • Satisfaction: the job is done when you're satisfied.
  • On-time completion: a schedule we commit to.
  • Fixed price: the price in the proposal is the price you pay.
  • Workmanship: we stand behind the installation.
  • Materials: quality products from manufacturers we trust.
  • No mess: daily cleanup.
  • Communication: you always know what's happening.
  • Post-project support: if something isn't right later, we come back.

Rye Roofing FAQs

How do I check a roofer's Westchester license?

Look the company up on the Westchester County Department of Consumer Protection's licensed-contractor search, and look for the green bumper sticker on their trucks.

Does a roof replacement in Rye need a permit?

Under the City code, adding a new roof covering within the framing's design load doesn't. Roofs over decks or entries, new chimneys, and structural changes do. We confirm your specific job with the Building Department.

When does the Board of Architectural Review get involved?

When permitted work substantially changes how the roof or a front or side facade looks from the street, such as a material change or a new dormer.

Can my clay tile roof be saved?

Often. If most tiles are sound, we can renew the underlayment and flashing and relay them.

Can you change my roof's shape or pitch?

Yes. That's carpentry and framing work we do regularly, with permits and drawings handled.

Do you also work in Rye Brook and Port Chester?

Yes, but they're separate municipalities with their own building offices, and Port Chester issues its own contractor license, so we check those rules separately.

Why hire a Connecticut company for a Rye roof?

Because we're a full builder licensed for Westchester work, with masonry and carpentry in-house, and our Greenwich work is only a few miles from Rye.

Will you name the City on your insurance certificate?

Yes. When a job needs a City permit, Rye requires the contractor's liability certificate to name the City as additional insured, along with proof of workers' compensation and disability coverage.

Where We Work in Rye

Rye Beach, Milton Point, Oakland Beach, Rye Gardens, Indian Village, Rye Woods, Greenhaven, downtown, and the Purchase Street area. Nearby: Harrison, Mamaroneck, Rye Brook, Port Chester, and Greenwich, CT.

  • Rye Beach
  • Milton Point
  • Oakland Beach
  • Rye Gardens
  • Indian Village
  • Rye Woods
  • Greenhaven
  • Harrison
  • Mamaroneck
  • Rye Brook
  • Port Chester
  • Greenwich CT
  • Stamford CT
  • Darien CT

Some Of Our Home Remodeling Project